| Peer-Reviewed

The Teaching Reform of Plastic Molding Process and Mold Design

Received: 19 January 2019     Published: 8 March 2019
Views:       Downloads:
Abstract

This paper introduces the reform of the course "plastic Molding Technology and Mould Design" in the aspects of class form, course content, teaching mode, teaching means, examination method and so on. Through the reform of the above aspects, the theoretical study can be closely combined with the practical contents such as UG mold design, mold disassembly and assembly, etc. students no longer feel boring and difficult to understand in their study, and their enthusiasm and initiative in learning have been obviously improved. In addition, this paper also introduces the overall design of the course, its content carrier comes from life products or related competition models, reflecting the practicability of the course. This reform is not only suitable for the groups with poor foundation in higher vocational colleges, but also suitable for the students with good foundation.

Published in Science Discovery (Volume 7, Issue 1)
DOI 10.11648/j.sd.20190701.15
Page(s) 18-21
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2019. Published by Science Publishing Group

Keywords

The Teaching Reform, Forhigher Vocational Colleges, Mold Design

References
[1] 魏朝晖.基于UC和Mohl tlow的天线外壳塑料模具设计[J].机械工程师,2016(02):30—31.
[2] 吴映雄.UG软件在轮胎模具制造中的应用 [J].机电工程技术,20l6 (41):2l一23.
[3] 董海东.基于UG的机座注塑模设计与数控加工 [J].模具技术.2016 (01):51一55.
[4] 王秀丽.UG软件在模具设计中的应用[J].制造业信息化.2016,45(09):124-127.
[5] 申锐.基于UG NX 6.0 Mold Wizard的侧向抽芯[J].装备制造技术.2012,4:116-117.
[6] 朱光力,周建安,洪建明.UGNX8.0塑料模具CAD/CAM实训实例教程.北京:高等教育出版社,2016:93-150.
[7] 曾向阳,谢国明.UG基础及应用教程[M].北京:电子工业出版社,2004.
[8] 李锦标.UG NX从造型设计到分模技巧实战[M].北京:机械工业出版社,2009.
[9] 朱光力,周建安,洪建明,周旭光.UGNX10.0住宿模具设计实例教程[M]. 北京:机械工业出版社,2018.
[10] 北京兆迪科技有限公司.UGNX8.5模具设计教程[M]. 北京:机械工业出版社,2013.
Cite This Article
  • APA Style

    Ren Yanxia, Jin Fengfeng, Cui Pei, Qin Guofang, Sun Haiyan Haiyan. (2019). The Teaching Reform of Plastic Molding Process and Mold Design. Science Discovery, 7(1), 18-21. https://doi.org/10.11648/j.sd.20190701.15

    Copy | Download

    ACS Style

    Ren Yanxia; Jin Fengfeng; Cui Pei; Qin Guofang; Sun Haiyan Haiyan. The Teaching Reform of Plastic Molding Process and Mold Design. Sci. Discov. 2019, 7(1), 18-21. doi: 10.11648/j.sd.20190701.15

    Copy | Download

    AMA Style

    Ren Yanxia, Jin Fengfeng, Cui Pei, Qin Guofang, Sun Haiyan Haiyan. The Teaching Reform of Plastic Molding Process and Mold Design. Sci Discov. 2019;7(1):18-21. doi: 10.11648/j.sd.20190701.15

    Copy | Download

  • @article{10.11648/j.sd.20190701.15,
      author = {Ren Yanxia and Jin Fengfeng and Cui Pei and Qin Guofang and Sun Haiyan Haiyan},
      title = {The Teaching Reform of Plastic Molding Process and Mold Design},
      journal = {Science Discovery},
      volume = {7},
      number = {1},
      pages = {18-21},
      doi = {10.11648/j.sd.20190701.15},
      url = {https://doi.org/10.11648/j.sd.20190701.15},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20190701.15},
      abstract = {This paper introduces the reform of the course "plastic Molding Technology and Mould Design" in the aspects of class form, course content, teaching mode, teaching means, examination method and so on. Through the reform of the above aspects, the theoretical study can be closely combined with the practical contents such as UG mold design, mold disassembly and assembly, etc. students no longer feel boring and difficult to understand in their study, and their enthusiasm and initiative in learning have been obviously improved. In addition, this paper also introduces the overall design of the course, its content carrier comes from life products or related competition models, reflecting the practicability of the course. This reform is not only suitable for the groups with poor foundation in higher vocational colleges, but also suitable for the students with good foundation.},
     year = {2019}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - The Teaching Reform of Plastic Molding Process and Mold Design
    AU  - Ren Yanxia
    AU  - Jin Fengfeng
    AU  - Cui Pei
    AU  - Qin Guofang
    AU  - Sun Haiyan Haiyan
    Y1  - 2019/03/08
    PY  - 2019
    N1  - https://doi.org/10.11648/j.sd.20190701.15
    DO  - 10.11648/j.sd.20190701.15
    T2  - Science Discovery
    JF  - Science Discovery
    JO  - Science Discovery
    SP  - 18
    EP  - 21
    PB  - Science Publishing Group
    SN  - 2331-0650
    UR  - https://doi.org/10.11648/j.sd.20190701.15
    AB  - This paper introduces the reform of the course "plastic Molding Technology and Mould Design" in the aspects of class form, course content, teaching mode, teaching means, examination method and so on. Through the reform of the above aspects, the theoretical study can be closely combined with the practical contents such as UG mold design, mold disassembly and assembly, etc. students no longer feel boring and difficult to understand in their study, and their enthusiasm and initiative in learning have been obviously improved. In addition, this paper also introduces the overall design of the course, its content carrier comes from life products or related competition models, reflecting the practicability of the course. This reform is not only suitable for the groups with poor foundation in higher vocational colleges, but also suitable for the students with good foundation.
    VL  - 7
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Department of Mechanical and Electrical Engineering, Jiyuan Vocational and Technical College, Jiyuan, China

  • Department of Mechanical and Electrical Engineering, Jiyuan Vocational and Technical College, Jiyuan, China

  • Department of Mechanical and Electrical Engineering, Jiyuan Vocational and Technical College, Jiyuan, China

  • Department of Mechanical and Electrical Engineering, Jiyuan Vocational and Technical College, Jiyuan, China

  • Department of Mechanical and Electrical Engineering, Jiyuan Vocational and Technical College, Jiyuan, China

  • Sections