| Peer-Reviewed

Study on Magnetic Properties of Electric Magnetic Materials Under External Temperature

Received: 25 June 2018     Published: 26 June 2018
Views:       Downloads:
Abstract

For electrical manufacturers, with the development of the power industry, the demand for special electrical equipment, such as large capacity transformers and high temperature transformers, is becoming more and more. The magnetic properties of silicon lamination at different temperatures have a very important reference value for designers to design products that meet the relevant parameters. Firstly, this paper selects various brands of electrical silicon lamination, designs and makes different test samples. Secondly, this paper adopts the ring sample method of one dimension magnetic property measurement, and makes the measurement of the magnetic property parameters under different temperature conditions, obtains the related test data and the change of the magnetic characteristic parameters of test samples and uses data processing method to sort out the test data. Finally, this paper analyzes the reasons for the data. The results show that magnetic properties have certain regularity with the change of temperature, and the measurement method in this paper can serve for practical engineering.

Published in Science Discovery (Volume 6, Issue 3)
DOI 10.11648/j.sd.20180603.21
Page(s) 205-211
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2018. Published by Science Publishing Group

Keywords

Silicon Lamination, Different Temperatures, Magnetic Properties Measurement

References
[1] 谢德馨,白保东.计算电磁学中电工钢片磁特性模型研究的新进展[J].沈阳工业大学学报,2007,29(3):289-294.
[2] 孙纪来.电工钢片二维磁特性测量研究[D].沈阳:沈阳工业大学,2011。
[3] 高洁,魏剑啸,卢卫疆,阮夫明,陈新.电工硅钢材料二维磁特性研究及测量技术相关进展[J].智能电网,2016,4(11):1067-1072。
[4] 任志强. 电工钢片二、三维磁特性测量中的若干问题研究[D].沈阳工业大学,2010。
[5] Y. Li, L. Cao, C. Zhang, Q. Yang and E. Li, "Rotational Core Loss of Silicon Steel Laminations Based on Three-Dimensional Magnetic Properties Measurement," in IEEE Transactions on Applied Superconductivity, vol. 26, no. 4, pp. 1-5, June 2016.
[6] Chiampi M, Negro A,Tartaglia M. A finite element method to compute three- dimensional magnetic field distribution in transformer cores.IEEE Trans. On Magn., 1980, 16: 1413-1419.
[7] 程文锋,史正军.基于爱泼斯坦方圈测试的硅钢片磁化曲线特性分析[J].变压器,2017,54(12):25-28。
[8] A. M. Mohammed, T. Cox, M. Galea and C. Gerada, "A New Method for Determining the Magnetic Properties of Solid Materials Employed in Unconventional Magnetic Circuits," in IEEE Transactions on Industrial Electronics, vol. 64, no. 3, pp. 2468-2475, March 2017.
[9] Y. Zhang, Q. Li, D. Zhang, B. Bai, D. Xie and C. S. Koh, "Magnetostriction of Silicon Steel Sheets Under Different Magnetization Conditions," in IEEE Transactions on Magnetics, vol. 52, no. 3, pp. 1-4, March 2016.
[10] M. Bali and A. Muetze, "Modeling the Effect of Cutting on the Magnetic Properties of Electrical Steel Sheets," in IEEE Transactions on Industrial Electronics, vol. 64, no. 3, pp. 2547-2556, March 2017.
[11] Norio Takahashi. Notes of Short Course on Material Modeling and Measurement. September, l999.
[12] 刘奇林.电工钢片各向异性磁场的有限元分析 [D].沈阳:沈阳工业大学,2010。
[13] Yamamoto T,Ohya Y. Single sheet tester for measuring core losses and permeability in a silieon steel sheet.IEEE Trans.On Magn, 1974, 10(2): 157-159.
[14] Silvester P,Chari MVK.Finite element solution of saturable magnetic field problems.IEEE Trans.On Power Apparatus and Systems, 1970, PAS-89:1642-1651.
[15] Nakata T.Analysis of flux distribution of three phase three-limbed transformer core.Electrical Engineering in Japan, 1975, 95(3): 43-50.
[16] Nakata T, Ishihara Y, Yamada K, et al. Nonlinear analysis of rotating flux in the T-joint of a three phase transformer core. EPS Soft Magnetic Materials Conf., Bratislava, 1977: 57-62.
[17] Napoli A Di,Vraneo S. Anisotropic effect on magnetic field distribution in ferromagnetic region of transformer core. IEEE Conf., Boston, 1980,4.
[18] Napoli A Di, Paggi R. A model of anisotropic grain-oriented steel. IEEE Trans on Magn., 1983, 19(4): 1557-1561.
[19] 殷春浩,崔亦飞.电磁测量原理及应用.徐州:中国矿业大学出版社.2008(第二版)。
Cite This Article
  • APA Style

    Jiang Wenyu, Li Weiye, Lou Jianyong, Wu Shidong. (2018). Study on Magnetic Properties of Electric Magnetic Materials Under External Temperature. Science Discovery, 6(3), 205-211. https://doi.org/10.11648/j.sd.20180603.21

    Copy | Download

    ACS Style

    Jiang Wenyu; Li Weiye; Lou Jianyong; Wu Shidong. Study on Magnetic Properties of Electric Magnetic Materials Under External Temperature. Sci. Discov. 2018, 6(3), 205-211. doi: 10.11648/j.sd.20180603.21

    Copy | Download

    AMA Style

    Jiang Wenyu, Li Weiye, Lou Jianyong, Wu Shidong. Study on Magnetic Properties of Electric Magnetic Materials Under External Temperature. Sci Discov. 2018;6(3):205-211. doi: 10.11648/j.sd.20180603.21

    Copy | Download

  • @article{10.11648/j.sd.20180603.21,
      author = {Jiang Wenyu and Li Weiye and Lou Jianyong and Wu Shidong},
      title = {Study on Magnetic Properties of Electric Magnetic Materials Under External Temperature},
      journal = {Science Discovery},
      volume = {6},
      number = {3},
      pages = {205-211},
      doi = {10.11648/j.sd.20180603.21},
      url = {https://doi.org/10.11648/j.sd.20180603.21},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20180603.21},
      abstract = {For electrical manufacturers, with the development of the power industry, the demand for special electrical equipment, such as large capacity transformers and high temperature transformers, is becoming more and more. The magnetic properties of silicon lamination at different temperatures have a very important reference value for designers to design products that meet the relevant parameters. Firstly, this paper selects various brands of electrical silicon lamination, designs and makes different test samples. Secondly, this paper adopts the ring sample method of one dimension magnetic property measurement, and makes the measurement of the magnetic property parameters under different temperature conditions, obtains the related test data and the change of the magnetic characteristic parameters of test samples and uses data processing method to sort out the test data. Finally, this paper analyzes the reasons for the data. The results show that magnetic properties have certain regularity with the change of temperature, and the measurement method in this paper can serve for practical engineering.},
     year = {2018}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Study on Magnetic Properties of Electric Magnetic Materials Under External Temperature
    AU  - Jiang Wenyu
    AU  - Li Weiye
    AU  - Lou Jianyong
    AU  - Wu Shidong
    Y1  - 2018/06/26
    PY  - 2018
    N1  - https://doi.org/10.11648/j.sd.20180603.21
    DO  - 10.11648/j.sd.20180603.21
    T2  - Science Discovery
    JF  - Science Discovery
    JO  - Science Discovery
    SP  - 205
    EP  - 211
    PB  - Science Publishing Group
    SN  - 2331-0650
    UR  - https://doi.org/10.11648/j.sd.20180603.21
    AB  - For electrical manufacturers, with the development of the power industry, the demand for special electrical equipment, such as large capacity transformers and high temperature transformers, is becoming more and more. The magnetic properties of silicon lamination at different temperatures have a very important reference value for designers to design products that meet the relevant parameters. Firstly, this paper selects various brands of electrical silicon lamination, designs and makes different test samples. Secondly, this paper adopts the ring sample method of one dimension magnetic property measurement, and makes the measurement of the magnetic property parameters under different temperature conditions, obtains the related test data and the change of the magnetic characteristic parameters of test samples and uses data processing method to sort out the test data. Finally, this paper analyzes the reasons for the data. The results show that magnetic properties have certain regularity with the change of temperature, and the measurement method in this paper can serve for practical engineering.
    VL  - 6
    IS  - 3
    ER  - 

    Copy | Download

Author Information
  • State Key Laboratory of Electrical Insulation and Power Equipment, Xi'an Jiaotong University, Xi'an, China

  • CRRC Zhuzhou Locomotive Co., Ltd., Zhuzhou, China

  • State Key Laboratory of Electrical Insulation and Power Equipment, Xi'an Jiaotong University, Xi'an, China

  • Wuxi Putian Core Co., LTD, Wuxi, China

  • Sections