| Peer-Reviewed

Analysis of the First Cracks Generating Between Two Holes Under Incremental Static Loading with an Innovation Method by Numerical Modelling

Received: 8 June 2017     Accepted: 23 October 2017     Published: 3 December 2017
Views:       Downloads:
Abstract

The application of Non-Explosive Expansion Materials (NEEM) has recently been increased in hard rock quarry mining, especially in granitic rocks. The most important mention in the quarry mining methods is determination of hole pattern, because it relates to cost of exploitation of the rock blocks, directly. It needs to predict the rock fracture process which it depends on the length of the first cracks and the growing to join together. A new algorithm has been suggested to evaluate of the first crack length by the linear elastic fracture mechanics (LEFM) theory. It requires determining a stress concentration factor which an experimental model has been utilized. A case study has been selected to verify of the numerical results which it is a granite mine in Iran. Numerical modeling has been applied to illustrate of rock fracture process and crack path and the results showed if the size of elements near the crack tip equal to grain size of the rock material or the ratio of the element length per diameter of the hole is selected about one per fifty, accuracy of the crack path prediction can be acceptable. On the other hand selection of an adequate rock slip criterion for crack planes is important, because of friction between two planes of a crack, plays an important role to predict of the crack growth. Also this research showed that Mohr-Coulomb criterion without cohesion is a suitable model for crack’s elements and Hoek-Brown failure criterion is an adequate model for rock substance.

Published in Mathematics and Computer Science (Volume 2, Issue 6)
DOI 10.11648/j.mcs.20170206.15
Page(s) 120-129
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2017. Published by Science Publishing Group

Keywords

Finite Element Method, Stress Concentration, Crack Growth, Rock, Hole

References
[1] Sh. Arshadnejad, K. Goshtasbi, J. Aghazadeh, Stress concentration analysis between two neighboring circular holes under internal pressure of a non-explosive expansion material, J. Yerbilimleri 30 (3) (2009) 259-270.
[2] Sh. Arshadnejad, A model for analysis of rock fracture in granite due to non-explosive expansion material, PhD Thesis, Azad University, Science and Research branch, Iran, 2010.
[3] Z. P. Bazant, Crack band model for fracture and geomaterials, in: Numerical Methods in Geomechanics, Edmonton (1982) 1137-1152.
[4] B. Braden, The Surveyor’s Area Formula, The College Mathematics J. 17 (4) (1986) 326-337.
[5] K. P. Chong, J. S. Harkins, D. M. Kuruppu, A. I. L. Leskinen, Strain rate dependent mechanical properties of western oil shale, in: 28th US Symposium on Rock Mechanics (1987) 157-164.
[6] M. M. Forcht, Factors of stress concentration photoelastically determined, Transactions of ASME, Applied Mechanics (1935) A-57, A-67.
[7] R. J. Fowell, Suggested method for determining Mode I fracture toughness using cracked chevron notched Brazilian disc (CCNBD) specimens, ISRM Commission on Testing Methods, Int. J. Rock Mech. & Mining Sciences 32 (1) (1995) 57-64.
[8] H. Gerçek, Interaction of parallel tunnels or roadways, Madencilik 27 (1) (1988) 39-49.
[9] H. Gerçek, Special elastic solutions for underground openings, in: Milestones in Rock Engineering, Balkema, Rotterdam (1996) 275- 290.
[10] H. Gerçek, Interaction between parallel underground openings, in: 19th Int. Mining Cong. & Fair of Turkey, IMCEV (2005) 73-81.
[11] M. Gholinejad, Sh. Arshadnejad, An experimental approach to determine the hole-pressure under expansion load, The Southern African Inst. of Mining & Metallurgy, SAIMM 112 (2012) 631-635.
[12] K. Goto, K. Kojima, K. Watabe, The mechanism of expansive pressure and blow-out of static demolition agent, in: Demolition & Reuse of Concrete and Masonry (RILEM), Nihon University, Japan 1 (1988) 116-125.
[13] A. W. Haddon, Stresses in an infinite plate with two unequal circular holes, Quarterly J. Mech. & App. Math. 20 (1967) 277-291.
[14] H. Hayashi, K. Soeda, T. Hida, M. Kanbayashi, Non-explosive demolition agent in Japan, in: Demolition and Reuse of Concrete (RILEM), London, (1994) 231-241.
[15] E. Hoek, Z. T. Bieniawski, Application of the photoelastic coating technique to the study of the stress redistribution associated with plastic flow around notches, South African Mech. Eng. 12 (8) (1963) 22-226.
[16] E. Hoek, Z. T. Bieniawski, Brittle rock fracture propagation in rock under compression, Int. J. Fracture Mech. 1 (3) (1965) 137-155.
[17] E. Hoek, C. Carranza-Torres, B. Corkum, Hoek–Brown failure criterion – 2002 edition, in: NARMS-TAC, University of Toronto Press, (2002) 267–273.
[18] R. C. J. Howland, On the stress in the neighborhood of a circular hole in a strip under tension, Transaction of Royal Society, London, Series A (1929) 229.
[19] R. C. J. Howland, Stresses in a plate containing an infinite row of holes, Philosophy Transaction of Royal Society, Series A 148 (1935) 471-491.
[20] R. C. J. Howland, R. C. Knight, Stress functions for a plate containing groups of circular holes, Philosophy Transaction of Royal Society, Series A 238 (1939) 357-392.
[21] Int. So. Rock Mech. (ISRM), Commission on standardization of laboratory and field test, Suggested method for determining the uniaxial compressive strength and deformability of rock materials, Int. J. of Rock Mech. & Mining Science & Geomech. Abs. 16 (1979) 135-140.
[22] S. Jana, Non-explosive expanding agent – an aid for reducing environmental pollution in mines, Indian Mining & Eng. J. 1 (1991) 31-35.
[23] G. B. Jeffrey, Plane stress and plane strain in bipolar coordinates, Transaction of Royal Society, Series A 221 (1920) 265- 293.
[24] GH. D. Joussineau, J. P. Petit, B. D. M. Gauthier, Photoelastic and numerical investigation of stress distributions around fault models under biaxial compressive loading conditions, Tectonophysics 363 (2003) 19-43.
[25] E. Z. Lajtai, Effect of tensile stress gradient on brittle fracture initiation, Int. J. Rock Mech. & Mining Sci. 9 (1972) 569-578.
[26] B. R. Lawn, T. R. Wilshaw, Fracture of Brittle Solids, Cambridge University Press, 1975.
[27] Ch. B. Ling, On stresses in a plate containing two circular holes, J. App. Physics 19 (1948) 77-82.
[28] Ch. B. Ling, Ch. P., Tsai, Stresses in a thick plate containing an eccentric spherical inclusion or cavity, Part I. Acta Mechanica 7 (1969) 169-186.
[29] Ch. Lipson, R. Juvinall, Handbook of Stress and Strength Design and Material Applications, The Macmillan Company, New York, 1963.
[30] V. Nesetova, E. Z. Lajtai, Fracture from compressive stress concentrations around elastic flaws, Int. J. Rock Mech. & Mining Sciences 10 (1973) 265-284.
[31] L. Obert, W. I. Duvall, Rock Mechanics and the Design of Structures in Rock, John Wiley & Sons, New York, 1967.
[32] P. Pal Roy, Rock Blasting Effects and Operations, A. A. Balkema, Leiden, Netherlands, 2005.
[33] R. E. Peterson, Stress Concentration Design Factors, John Wiley & Sons, New York, 1974.
[34] K. J. Schulz, On the state of stress in perforated strips and plates, in: Neth. Royal Academic Sciences (1942) 45-48.
[35] T. Szwedzicki, Draft ISRM suggested method for determining the indentation hardness index of rock materials, Int. J. Rock Mech. & Mining Sciences 35 (6) (1998) 831-835.
[36] H. Tada, P. C. Paris, G. R. Irwin, The stress analysis of cracks Handbook, Third Edition, The American Society of Mechanical Engineers, Professional Engineering Publishing Limited, 2000.
[37] B. N. Whittaker, R. N. Singh, G. Sun, Rock fracture mechanics, principles, design and applications, Elsevier, Netherlands, 1992.
[38] S. Yağız, Assessment of brittleness using rock strength and density with punch penetration test, Tunnelling & Underground Space Tech. 24 (2009) 66-74.
[39] X. Yan, Rectangular tensile sheet with single edge crack or edge half-circular-hole crack, J. Eng. Failure Analysis 14 (2007) 1406-1410.
[40] R. W. Zimmerman, Stress concentration around a pair of circular holes in a hydrostatically stressed elastic sheet, J. App. Mech. 55 (1988) 487-488.
[41] R. W. Zimmerman, Approximate expressions for stress concentrations in elastic solids containing multiple holes or inclusions, Recent Developments in Elasticity, App. Mech. Div., ASME 124 (1991) 71-75.
Cite This Article
  • APA Style

    Shobeir Arshadnejad. (2017). Analysis of the First Cracks Generating Between Two Holes Under Incremental Static Loading with an Innovation Method by Numerical Modelling. Mathematics and Computer Science, 2(6), 120-129. https://doi.org/10.11648/j.mcs.20170206.15

    Copy | Download

    ACS Style

    Shobeir Arshadnejad. Analysis of the First Cracks Generating Between Two Holes Under Incremental Static Loading with an Innovation Method by Numerical Modelling. Math. Comput. Sci. 2017, 2(6), 120-129. doi: 10.11648/j.mcs.20170206.15

    Copy | Download

    AMA Style

    Shobeir Arshadnejad. Analysis of the First Cracks Generating Between Two Holes Under Incremental Static Loading with an Innovation Method by Numerical Modelling. Math Comput Sci. 2017;2(6):120-129. doi: 10.11648/j.mcs.20170206.15

    Copy | Download

  • @article{10.11648/j.mcs.20170206.15,
      author = {Shobeir Arshadnejad},
      title = {Analysis of the First Cracks Generating Between Two Holes Under Incremental Static Loading with an Innovation Method by Numerical Modelling},
      journal = {Mathematics and Computer Science},
      volume = {2},
      number = {6},
      pages = {120-129},
      doi = {10.11648/j.mcs.20170206.15},
      url = {https://doi.org/10.11648/j.mcs.20170206.15},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.mcs.20170206.15},
      abstract = {The application of Non-Explosive Expansion Materials (NEEM) has recently been increased in hard rock quarry mining, especially in granitic rocks. The most important mention in the quarry mining methods is determination of hole pattern, because it relates to cost of exploitation of the rock blocks, directly. It needs to predict the rock fracture process which it depends on the length of the first cracks and the growing to join together. A new algorithm has been suggested to evaluate of the first crack length by the linear elastic fracture mechanics (LEFM) theory. It requires determining a stress concentration factor which an experimental model has been utilized. A case study has been selected to verify of the numerical results which it is a granite mine in Iran. Numerical modeling has been applied to illustrate of rock fracture process and crack path and the results showed if the size of elements near the crack tip equal to grain size of the rock material or the ratio of the element length per diameter of the hole is selected about one per fifty, accuracy of the crack path prediction can be acceptable. On the other hand selection of an adequate rock slip criterion for crack planes is important, because of friction between two planes of a crack, plays an important role to predict of the crack growth. Also this research showed that Mohr-Coulomb criterion without cohesion is a suitable model for crack’s elements and Hoek-Brown failure criterion is an adequate model for rock substance.},
     year = {2017}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Analysis of the First Cracks Generating Between Two Holes Under Incremental Static Loading with an Innovation Method by Numerical Modelling
    AU  - Shobeir Arshadnejad
    Y1  - 2017/12/03
    PY  - 2017
    N1  - https://doi.org/10.11648/j.mcs.20170206.15
    DO  - 10.11648/j.mcs.20170206.15
    T2  - Mathematics and Computer Science
    JF  - Mathematics and Computer Science
    JO  - Mathematics and Computer Science
    SP  - 120
    EP  - 129
    PB  - Science Publishing Group
    SN  - 2575-6028
    UR  - https://doi.org/10.11648/j.mcs.20170206.15
    AB  - The application of Non-Explosive Expansion Materials (NEEM) has recently been increased in hard rock quarry mining, especially in granitic rocks. The most important mention in the quarry mining methods is determination of hole pattern, because it relates to cost of exploitation of the rock blocks, directly. It needs to predict the rock fracture process which it depends on the length of the first cracks and the growing to join together. A new algorithm has been suggested to evaluate of the first crack length by the linear elastic fracture mechanics (LEFM) theory. It requires determining a stress concentration factor which an experimental model has been utilized. A case study has been selected to verify of the numerical results which it is a granite mine in Iran. Numerical modeling has been applied to illustrate of rock fracture process and crack path and the results showed if the size of elements near the crack tip equal to grain size of the rock material or the ratio of the element length per diameter of the hole is selected about one per fifty, accuracy of the crack path prediction can be acceptable. On the other hand selection of an adequate rock slip criterion for crack planes is important, because of friction between two planes of a crack, plays an important role to predict of the crack growth. Also this research showed that Mohr-Coulomb criterion without cohesion is a suitable model for crack’s elements and Hoek-Brown failure criterion is an adequate model for rock substance.
    VL  - 2
    IS  - 6
    ER  - 

    Copy | Download

Author Information
  • Department of Mining Engineering, Islamic Azad University, Mahallat Branch, Iran

  • Sections